General Microscope Accessories
General accessories for use with microscopes. Products include lens oil, lens cleaner, slide dispensers, microscope covers, vessel holders, light cubes, and flow cells.
Many parts of your microscope can be updated or replaced including microscope lamps, lenses, and eyepieces. Replacement lamps, light sources, and power cords can extend the working lives of your microscopy equipment. New or replacement objectives and lenses can help increase the total magnification available with your microscope.
Add greater magnification or exchange your eyepiece for one with a reticule to more easily estimate the sizes of the items being viewed.
Replace or update your mechanical stage or clamps or add cell culture vessel adapters to facilitate specimen positioning.
Condensers can also be replaced, and conversion kits are available to add phase contrast, polarization, fluorescence, or other capabilities to your current system.
Some microscopes can be adapted for use with still or video cameras. Look for cameras and adapters designed for your specific microscope brand. Film and documentation-related products may also be available to support your record-keeping.
Temporary, semi-permanent, and more long-term slide storage options include:
- Slide racks that securely hold slides during staining procedures
- Folding fiberboard or plastic slide holders with horizontal indentations that keep microscope slides in place
- Slide storage boxes with vertical dividers; made from fiberboard, plastic, and wood and available in multiple sizes
- Slide holders and mailers for transporting slides safely
- Slide storage systems and cabinets for large quantities of slides or archival storage
Electron Microscopy Sciences Grain Sizing Reticle NG60, 25 mm
For the determination of non-metallic inclusion content of steel. NG60 meets EN 10247 and NG61 Meets ISO 4976. Both are scaled for use eith 10x objective magnification Pattern
Size: 25 mm
Method: EN 10247
Electron Microscopy Sciences Shorter Pin SEM Stub Slotted 1-1/4" head with 6 mm Pin, Aluminum, 1/8" Pin diameter
SEM specimen mount with shorter pin and slotted head for use with Zeiss/LEO 1500 SEM, FESEM & FIB systems. Made from ultra-pure aluminum with a standard lathe finish.
Head: 1-1/4"
Pin height: 6 mm
Pin diameter: 1/8"
Electron Microscopy Sciences JEOL SEM Cylinder Mount 1" surface, 8 mm height, Aluminum
Cylinder specimen mounts are for use with JEOL scanning electron microscopes. The mounts are made from ultra-pure aluminum with a standard lathe finish.
Head: 1"
Height: 8 mm
Electron Microscopy Sciences SEM Hitachi Mounts Rectangular 11 mm x 5.5 mm, 3.5 mm height
Rectangular SEM specimen mounts for use with Hitachi S-5200/S-5500/SU-9000. Made from ultra-pure aluminum. Available in 11 mm x 5.5 mm with 2, 3.5, 5 or 5..5 mm height.
Size: 3.5 mm
Electron Microscopy Sciences Shorter Pin SEM Stub Slotted 2" Head, 6 mm Pin, Aluminum, 3.2 mm Pin diameter
SEM specimen mount with shorter pin and slotted head for use with all Zeiss/LEO SEM, FESEM & FIB systems. Made from ultra-pure aluminum with a standard lathe finish.
Head: 2"
Pin height: 6 mm
Pin diameter: 3.2 mm
Electron Microscopy Sciences Shorter Pin SEM Stub Slotted 1-1/4" head with 6 mm Pin, Aluminum, 1/8" Pin diameter
SEM specimen mount with shorter pin and slotted head for use with Zeiss/LEO 1500 SEM, FESEM & FIB systems. Made from ultra-pure aluminum with a standard lathe finish.
Head: 1-1/4"
Pin height: 6 mm
Pin diameter: 1/8"
Electron Microscopy Sciences JEOL SEM Cylinder Mount 1-1/4" surface, 13/16" height, Aluminum
Cylinder specimen mounts are for use with JEOL scanning electron microscopes. The mounts are made from ultra-pure aluminum with a standard lathe finish.
Head: 1-1/4"
Height: 13/16"
Electron Microscopy Sciences SEM Hitachi M4 45°, 5/8" head, 3/8" height, Aluminum
45 degree SEM specimen mount with aluminum slotted head for use with Hitachi. Made from ultra-pure aluminum.
Head: 5/8"
Height: 3/8"
Electron Microscopy Sciences Evactron Adapter Flange HITACHI, 58x58 mm, 24 mm O-ring ID
Evactron adaptor flanges are identified by physical dimensions of the blank plate in the SEM/FIB. ORID is a measurement of the inner diameter of the O ring.
Size: 58 x 58 mm
O-ring ID: 24 mm
BC: 41.5 mm
Mounting holes: 4 PLUG, 1 PC
Electron Microscopy Sciences Standard Pin SEM Stub 12 Division 32 mm head with 9 mm Pin, Aluminum, 3.2 mm Pin diameter
Pin stub mount with 12 divisions for use with FEI/Philips, ZEISS/LEO, Cambridge, Leica, Amray, Tescan and Camscan SEMs. Made from ultra-pure aluminum with a standard lathe finish.
Head: 32 mm
Pin height: 9 mm
Pin diameter: 3.2 mm
Electron Microscopy Sciences Standard Pin SEM Stub Slotted 38 mm head with 8 mm Pin, Aluminum, 3.2 mm Pin diameter
Pin stub mount with slotted head for use with Leica, Cambridge, LEO, FEI, Phillips, PHENOM, Zeiss, Camscan. Made from ultra-pure aluminum with a standard lathe finish.
Head: 38 mm
Pin height: 8 mm
Pin diameter: 3.2 mm
Electron Microscopy Sciences SEM TM-3000 Angle Mount 25° Angle 25 mm Head, Aluminum
SEM specimen mount for TM1000/TM3000 with EDS Analysis Systems. These angled mounts feature an orientation cross for precise positioning towards the EDS detector. A tilt provides better detection and higher signal-to-noise ratio for x-ray analysis. Made from Aluminum.
Head: 25 mm
Electron Microscopy Sciences Evactron Adapter Flange HITACHI, 69 mm, 47.5 mm O-ring ID
Evactron adaptor flanges are identified by physical dimensions of the blank plate in the SEM/FIB. ORID is a measurement of the inner diameter of the O ring.
Size: 69 mm
O-ring ID: 47.5 mm
Mounting holes: 4
Electron Microscopy Sciences Evactron Adapter Flange JEOL, 64 mm, 40 mm O-ring ID
Evactron adaptor flanges are identified by physical dimensions of the blank plate in the SEM/FIB. ORID is a measurement of the inner diameter of the O ring.
Size: 64 mm
O-ring ID: 40 mm
BC: 55 mm
Mounting holes: 4
Electron Microscopy Sciences Wafer Cleaving Kit with Mat
The complete tool set to scribe and cleave cleanly. This is a critical step to getting the best cross-sections. The kit includes two diamond scribes for marking and scribing (straight tip and 30 degree tip), a pen-style diamond scribe, tweezers with black soft fiber fine tip (length 6.25 in), wafer cleaning pliers, a clear plastic ruler with metric and US units, and tungsten cleaving wire. This kit is suitable for a wide variety of substrates and wafers (Si, GaAs, glass). Includes 12x18 in wafer mat.